Induction Unit For Suspended Ceilings
DID614
ACTIVE CHILLED BEAM WITH FOUR-WAY AIR DISCHARGE AND HORIZONTAL HEAT EXCHANGER, SUITABLE FOR GRID CEILINGS WITH GRID SIZE 600 OR 625
Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems.
- Preferably for room heights up to 4.00 m
- High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
- High comfort levels due to low airflow velocity in the occupied zone
- Five nozzle variants to optimise induction based on demand, including adjustable twin nozzles, i.e. one pair of nozzles with different diameters
- Removable induced air grille, fixed with magnets, with decreasing apertures towards the edges
Optional equipment and accessories
- Control system
- Adjustable air control blades for air direction control
- Powder coating in many different colours, e.g. RAL CLASSIC
- With an extended border also suitable for freely suspended installation
DID312
ACTIVE CHILLED BEAM WITH TWO-WAY AIR DISCHARGE, 300 MM NOMINAL WIDTH, VERTICAL HEAT EXCHANGER AND CONDENSATE DRIP TRAY
Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems. The condensate drip tray is useful if the temperature temporarily falls below the dew point.
- Preferably for room heights up to 4.00 m
- High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
- High comfort levels due to low airflow velocity in the occupied zone
- Three nozzle variants to optimise induction based on demand
- Hinged, removable induced air grille in four designs
Optional equipment and accessories
- Control system
- Additional casing for extract air
- Heat exchanger powder-coated black
- Powder coating in many different colours, e.g. RAL CLASSIC
DID632
ACTIVE CHILLED BEAM WITH TWO-WAY AIR DISCHARGE AND HORIZONTAL HEAT EXCHANGER, SUITABLE FOR GRID CEILINGS WITH GRID SIZE 600 OR 625
Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems
- Preferably for room heights up to 4.0 m
- High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
- Four nozzle variants to optimise induction based on demand
- Hinged, removable induced air grille in four designs
Optional equipment and accessories
- Control system
- Additional casing for extract air
- Heat exchanger powder-coated black
- Powder coating in many different colours, e.g. RAL CLASSIC
- Adjustable air control blades for air direction control
- With an extended border also suitable for freely suspended installation
DID642
SUPER FLAT ACTIVE CHILLED BEAM WITH TWO-WAY AIR DISCHARGE AND HORIZONTAL HEAT EXCHANGER, SUITABLE FOR GRID CEILINGS WITH GRID SIZE 600 OR 625
Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems
- Preferably for room heights up to 4.0 m
- High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
- Five nozzle variants to optimise induction based on demand, including adjustable twin nozzles, i.e. one pair of nozzles with different diameters
- Hinged, removable induced air grille in two designs
Optional equipment and accessories
- Control package
- Additional casing for both supply air and extract air, or for additional supply air
- Supply air and extract air units upon request
- Adjustable air control blades for air direction control
- Heat exchanger powder-coated black
- Powder coating in many different colours, e.g. RAL CLASSIC
- Adjustable air control blades for air direction control